Top 7 Best Concrete Anchors For Gun Safe in 2023 [ Updated ]

Gun safes, for the most part, are built to be sturdy. But if you’re installing one in your home, you need to think about how it’s going to be anchored down. You want something heavy enough and strong enough to keep it from being knocked over by an intruder or earthquake.

The use of a concrete anchor for your gun safe is important because it should be able to withstand the weight and pressure from the gun safe. Depending on your home demand, many different types of anchors can be used, from steel rods to rebar cages.

You’ll also look at how much weight your gun safe needs to be able to hold before determining if concrete anchors are needed. If your safe weighs less than 1000 pounds, you don’t need any special anchors; otherwise, we recommend using them with the appropriate hardware (e.g., lag bolts).

In the event of a break-in, you want to make sure your gun safe is as secure as possible. But if you don’t have a concrete floor, attaching it securely can be not easy. In this blog post, we’ll talk about how to use concrete anchors for gun safes that sit on top of carpet or other surfaces without concrete floors. 

There are many places where you can buy the Best Concrete Anchors For Gun Safe, but they may not be best suitable for your needs. You need to know what type of Best Concrete anchors for a gun safe is right for you and your home needs.

After extensive research, we have listed down the top 7 concrete anchors that are best suited to your installation needs. Let’s read and explore it!

Recommendations Gun safe Anchor Bolts

---

1. CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor

CONFAST installation was designed with simplicity and ease of use in mind. The wedge anchor has a surface-ground hex shape which allows for excellent gripping power, and comes packaged with nuts and pan head screws (fasteners included).

Installers no longer need to worry about the size or type of fastener. CONFAST anchors come standard with a 3/8″ diameter stainless steel bolt, pre-drilled 3″ deep hole, threaded end cap for drywall installations that won’t take up your time or create changes in design aesthetics.

The CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor is made with 304 stainless steel to provide corrosion resistance. This anchor is designed for concrete only, so it should not be used in block or brick base material.

The anchor requires a hole that measures 3/8″, which must be drilled with the right tools and guidelines for best results. The minimum embedment into the material is 1-1/2″, but there needs to be at least 1-1/2″ of anchoring depth if anchored into concrete material.

CONFAST 3/8 x 3 Stainless Steel Anchor is a superior, high-quality multithreaded anchor. These anchors can be installed in concrete and feature a hex head and coarse thread.

You can use these CONFAST 3/8 x 3 Anchors to reinforce fixtures or materials that weigh up to 5000 pounds. The hole in the material being fastened must be larger than 1/2″ diameter for best results as this provides ample room for installation as well as torquing the anchor correctly.

This product should not be installed any closer than 1-7/8″ from an unsupported edge of concrete because it could come loose during installation or over time due to vibrations.

Specifications

• Minimum embedment: 1-1/2″ 
• Minimum Fixture hole diameter: 3/8″ 
• Environment: wet
• Length: 3″

Final Verdict

CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor is the fast, easy way to install a wide variety of surfaces with a professional installation. CONFAST offers stainless steel anchors in various sizes for all your fastening needs and can be used in wet or submerged environments. It comes with quick packaging that includes self-contained nuts and washers. CONFAST will have you going for miles!

---

2. CONFAST 1/2″ x 7″ Wedge Anchor Zinc Plated 

CONFAST wedge anchors are zinc plated for corrosion resistance in dry environments. These anchors have a wide range of sizes, including small holes that correspond to the anchor size. This makes it easy and quick to install with all nuts and washers included in the packaging design. CONFAST 1/2″ x 7″ Wedge Anchor Zinc Plated features a cone shape, so minimum embedment depth is required, which simplifies installation, providing a finished appearance.

The CONFAST 1/2″ x 7″ Wedge Anchor is a must-have in construction projects when installing pieces of sheet metal such as walkways and decorative panels. Its zinc-plated design will prevent corrosion and rusting without artificial coatings or sealants. 

This anchor is inserted into concrete up to deep. Once drilled in, you place the nut on the end and tighten it for a secure hold in any foundation material. It’s perfect for use in sun exposure regions with its zinc plate covering.

Specifications

• Bit Size: 1/2″

• Minimum Embedment: 2-1/4″

• Minimum Fixture Hole Diameter: 5/8″ (In-place)

• Material: Carbon Steel Zinc Plated

 Final Verdict

This zinc plated CONFAST 1/2″ x 7″ Anchor has a wide range of sizes, ensuring a proper fastener for best results. The hole size is anchor size which simplifies installation. It comes packaged with nuts and washers.

---

 3. ITW 11013 Red Head Sleeve Anchor 3/8 in.

Its 11013 Red Head Sleeve Anchor is a durable and convenient solution for fixing concrete, block, or brick. At just 3/8 of an inch in diameter, this sleeve anchor will easily fit into small spaces such as handrails, window frames, partition walls, and brick supports.

This design removes the need for making holes in walls and reduces installation time by over 50%! The zinc-plated steel construction ensures a dependable performance while providing a beautiful finish with loads up to 630 pounds per fastening point.

The ITW 11013 Red Head Sleeve Anchor 3/8 in. is perfect for reinforcing concrete structures at the axle position of vehicular loads. The product is preassembled, eliminating the need to use bolts or screws, and includes all the materials you will need to install it.

This construction anchor comes with fasteners that can be easily installed using an electric screwdriver, drill press, or power auger sawhorse chuck type. The tool utilizes a socket extension adapter of ¼” hex shank capacity, which inserts into a 7/16 “hex drive compatible slot on air-driven-drill chucks on some model of impact drivers.

 Specifications

• Cutting Diameter: 3/8 Inches
• Material: ‎Metal
• Product Dimensions:3.5 x 5.5 x 2.8 inches
• Assembled Diameter:3/8 Inches

 Final Verdict

The 11013 Red Head Sleeve Anchor 3/8″ is a versatile and durable way to keep things secure. It is available in packages of 4 or individually. These can be used for anything from handrails to shelves with ease. The steel construction will securely attach the anchor into any solid wall material with its zinc-plated surface.

---

 4. Liberty safe anchor kit

A Liberty safe is an investment in your family and belongings. But we know you’ve invested a lot of time, energy, and resources into protecting what matters most to you. Liberty safes are built from top-notch steel with strong, high-quality materials that keep them sturdy against even the toughest attacks.

This Anchor Kit enables homeowners to more safely anchor their Liberty safe inside a floor or on a wall for ultimate security where stability matters most.

Liberty Safes has more than 30 proven models. Their Anchor Kit makes it easy to anchor your safe when bolted down in multiple places, even if you don’t have access below the floor for a drilled hole.

They also sell mounting plates and anchors separately for those who already have a steel safe installed without an installation kit. Liberty Safe is the only company with this option!

This Anchor Kit includes ten different size screws. The Screw heads are slotted for easy installation, so no other tools are required other than a drill.

The safe’s design ensures resistance to kick-in, while its weight makes it hard to move quickly. This kit is perfect if you live in an earthquake zone or have trouble with sedimentary soil that could shift over time and cause the anchor bolts to loosen up after being fixed in place.

The included threaded anchors can be used with popular brick materials, including mortar, sandstone blocks, sills, or even old bricks pulled from walls of historic homes!

Specifications

• Drill bit size: 3/8″
• Item Dimensions LxWxH:8 x 4 x 2 inches (20.3 x 10.2 x 5.1 cm)
• Diameter: 4″

Final Verdict

The Liberty Safe Anchor Kit is a best-selling security add-on to gun safes. This kit can be utilized either as a standalone product or as a complementary item. Installation of the safe anchors is easy, with pre-drilled holes in your safe for quick installation. Keep your guns, documents, and other valuables protected from volatile disasters or burglaries by anchoring down your Liberty Safe.

---

 5. CONFAST 3/8″ x 3″ Hex Sleeve Anchor

CONFAST 3/8″ x 3″ zinc plated anchor work with a wide variety of masonry and concrete types, and the preassembled design makes them ready to install. The 360°-degree expansion provides consistent holding values during installation in a wide range of base materials for any job, and all steel parts promise heavy-duty performance.

The CONFAST sleeve anchors are sized such that their corresponding anchor size equals hole size; it’ll be easy to remember which drill bit diameter is required for each application.

FAST is a smart and economical choice for most anchoring needs. This 3/8″ x 3″ Hex Sleeve Anchor features mounting hardware that’s specifically designed to penetrate cleanly and quickly, producing an easier installation than traditional screws or nails.

The threaded sleeve and hex shaft combine to create a strong, versatile anchor ideal for attaching fixtures, cabinets, shelving units, anything with less than 1-1/4″ of clearance behind it. Plus, the zinc-plated steel construction is corrosion resistant.

The most commonly used anchor for attaching to wood-based subfloors, these 3/8″ hex sleeves can be installed either tapering down or straight downwards. These anchors need a minimum of 2-1/2″ clearance for installation.

If you don’t want any exposed screws on your framing that are visible after installation, use our 1/4 x 3″ sleeve anchor with fewer exposed points and taps into the plywood underneath the finish floor without penetration between floors.

Specifications

• Minimum anchor embedment in 1-1/4″
• Fixture hole diameter: 3/8″
• Environment: dry

Final Verdict

The CONFAST Hex Sleeve Anchor is a versatile fastener designed to provide stability in the toughest environments. This product is made of Carbon Steel that resists corrosion and has a wider range of strength. It features an anchor head style which makes it easier to install with simple hand tools for DIY projects around your home!

---

6. CONFAST 1/2″ x 4-1/4″ Wedge Anchor Zinc Plated

CONFAST Wedge Anchors are the fastest, cheapest, and easiest way to mount something. The zinc plating ensures maximum corrosion protection. No need for drywall anchors here; these anchors work with almost any surface found in your home or office building.

It’s always wise to be prepared, though, which is why every pack of CONFAST Wedges comes complete with nuts and bolts (and washers). Its easy installation ensures that it’ll take less than five minutes before mounting whatever you want to wherever you want it.

CONFAST Wedge Anchor Zinc Plated is the perfect anchor for hanging things on that will hold up. This set of 25 zinc-plated wedges won’t rust and corrode through time like most metals. These anchors are a handy staple to have around for any project where you need a strong surface to balance on.

These are made from sturdy steel with a powerful grip, and these wedge Anchors will stick out from wood or drywall without leaving an ugly hole behind. Install these staples in walls before timber framing work begins, and never worry about trying to find something heavy enough to counterbalance what’s being put together; these screws do all the heavy lifting.

Features

• Item Diameter:1/2 inches

• Length: 4 1/4 inches

• Material: carbon steel zinc plated

Final verdict

A highly-rated product with 25 packs. The zinc-plated fragments help keep the product from rusting, and there’s a wide range of sizes so you can find the right one for your project! Once it’s in, merely add nuts and washers to finish the installation quickly and enjoy years of reliable service.

---

7. CONFAST 3/8″ x 3″ Stainless Steel Anchor

CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor (10 per box) is the fast, quick and complete installation you’re looking for. It is made from 304 stainless steel and rated to work in wet and submerged environments without rusting.

This anchor makes tunneling a breeze. It is available in a wide range of sizes to ensure a proper watertight fit with nuts and washers securely packaged inside each anchor. The hole size is always right and ensures that installation is simpler than ever.

The CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor is used to anchor larger items for stability. The product contains ten anchors per package, which are stainless steel to last for many years.

It’s made with heavy-duty 304 stainless steel, so it has a higher level of durability than other holders on the market. Plus, you’ll receive 50 wedges in this purchase compared to just 20 anchors from competitors at your nearest hardware store.

This item also meets all international standards and enforces the ANSI requirements that are necessary for quality assurance.

Specifications

• The diameter of the anchor is 3/8″.
• Fixture hole diameter: 3/8″ diameter
• Edge distance: 1-7/8″ 

Final Verdict

The CONFAST 3/8″ x 3″ Stainless Steel Wedge Anchor is made from 304 stainless steel, so it can be used in wet, submerged environments and will not rust. There are different sizes to ensure the proper fastener for best results, and they include nuts and washers that provide a quick installation.

---

Best Concrete anchors for gun safe – Buying Guide

---

The recommendations would have made it possible for you to pick an appropriate anchor for your gun safe. But things will get simpler if you remember some of the key aspects in mind.

Those will make it so easy to analyze the items appropriately. So, without spending any more time, let us have a glance at those factors:

Installation Procedure

The first thing to consider out is the installation method. Make sure that the one you are picking is simple to install. Otherwise it will be quite hard to put the safes effectively.

Additionally, ensure all of the needed hardware arrives with the box includes washers and other items.

If you chance to obtain goods that come without the essential hardware, you would have to buy those separately.

Length

Another element that is extremely essential is the length. For this, you need to examine the depth of the base of the gun safe. Get ones that are double the thickness or more since those will go through the safe and dig far down into the floor underneath. As a consequence, the installation will be reasonably safe.

Compatibility

Not all of the anchors you may discover in the market will be appropriate for drilling a concrete floor. And if customers buy an item that is incompatible, they will squander their money on a useless product or something that is not the greatest when it comes to defense.

Construction Material

Almost all of the units which are sold would be made from steel. The quality of the steel will be unique for each of them. And the grade has a significant role to play when it comes to durability. Usually, the durable ones include the production of high materials.

So, verifying the quality of the steel is vital. By buying the ones that are of high-quality steel, you would get yourself a product of great durability. And those are going to continue for a lengthy amount of time without displaying any difficulties.

Size

One of the essential factors that will be in your mind when choosing one of these is the size. Usually, they are available in a wide variety of different sizes. Some makers offer several sizes of anchors in one box. And the sizes will be indicated in terms of the length of the anchor.

By keeping the diameter in mind, pick the one that fits the size properly. If you chance to obtain something which is a bit bigger, it will not go through. On the other side, it will not be a secure installation if the size is a bit tiny.

Coating

Aside from the building material, the total longevity will rely on the coating as well. In general, the units with a suitable coating on the outside should be better able to withstand chipping. Those would not lose integrity rapidly, which will gradually increase the lifespan.

Rust Resistance

The rust resistance factor depends on two variables. One is the quality of the substance, and the other is the coating on the exterior. If each of these two variables checks out, the device should be very resistant to rust. And the items with a superior level of rust resistance generally survive for a lengthy amount of time.

Frequently Asked Questions

Conclusion

The answer is to use the correct anchor bolts and get a professional installer who knows what they’re doing. You can’t just buy any old bolt at your local hardware store, nor should you be tempted by the DIY fix of using large screws.

Concrete anchors are designed precisely to work with different floors and provide maximum holding power while preventing damage from occurring during installation or over time. If you want peace of mind that your guns will stay where they belong when tragedy strikes, it’s worth getting this one thing right!