how to crack a gun safe with electronic lock

How To Crack A Gun Safe With Electronic Lock

Did you know that it’s possible to crack a gun safe with an electronic lock?  Yes, This post explores how How To Crack A Gun Safe With Electronic Lock. We will go in-depth into how the code works, how to find the right tools, and how to use them.

If you want a comprehensive guide to cracking a gun safe with an electronic lock, this article is for you!

What is a gun safe with an electronic lock?

A gun safe with an electronic lock is a type of gun safe that uses specific electronic codes to open and close. These types of safes are usually found in homes, businesses, or other places where security measures need to be taken seriously.

There are several different types of these safes available today; however, they all use similar methods for opening and closing. The two most common ways these safes can include: using RFID technology (radio frequency identification) which allows you to access your firearm by having it next to one of your items such as your wallet or belt buckle.

Through entering a PIN provided by the manufacturer based on any numbers from 0000 up to nine digits long. Most of the time, these electronic gun safes will include a digital display that contains how many unsuccessful pin tries you have left.

In most cases, if someone were to try and crack one of these locks without knowing how they work, it would take them up to 20 minutes to open.

how to crack a gun safe with electronic lock
How To Crack A Gun Safe With Electronic Lock

How to crack the code in a gun safe with an electronic lock?

The following are some methods to try to crack the code on an electronic gun safe.

1. Digital attack method:

This is one of the most common methods; it involves trying every possible number combination until you get in. The length of time this takes is determined by the number of numbers involved.

The numbers on your lock are three or six-digit combinations. If you have a six-digit lock with only three different numbers (000-999), there are 1000 possibilities (10x10x10) for each number of your combination.

That means there are 1 million combinations to try before getting in. How fast this can be done using modern computers has been demonstrated by Renowned hacker Barnaby Jack.

He could open six out of 6 locks of the same model within 30 minutes, using a custom-built device and computer. How fast this process often depends on how good your practice and your equipment are and can range from many days to many months.

2. Manipulate the lock:

 If you have a lock with four buttons or dials, you can try to manipulate it physically so that it opens while trying out different combinations. How well this works varies based on the model of the safe/lock, but sometimes they’re designed such that you can do this (it happens more than one would expect).

If your electronic gun safe has just four buttons, then it might be worth giving this method a shot before purchasing other equipment or tools! How well this method also works greatly depends on luck and patience and may not work at all.

3. Take it apart:

If your electronic gun safe has a few screws and is sealed tight, you can take it apart and expose the locking mechanism to see if it uses a standard type of lock.

Out of all the methods to open an electronic lock, this is one of the most effective for safe mechanical locks since it’s very difficult to make these un-pickable (unlike digital combination locks).

 How well these method works depends on the built-in mechanism of your safe and how much effort you’re willing to put into opening it.

Most small electronic safes use similar internal locking mechanisms, so they’re fairly easy to pick since they’re often designed without too many security features. How big or small your safe is may also affect how difficult it is to open.

4. Pick the lock:

How well this works depends on how well-built your safe is and what kind of lock mechanism it has. If you have one with a standard mechanical tumbler pin lock, more advanced tools will be necessary than if you had one with some other type of locking mechanism.

How big or small your safe may also affect how difficult it is to pick the lock.

5. Drill the lock:

How this works depends on the safe mode, but most models use standard lock types that can be picked or manipulated. How big or small your safe is may also affect how difficult it is to drill.

How quickly this method goes often depends on how good you and your equipment are and ranges from a few minutes to hours, even possible at all depending on the model of the safe in question, especially large/expensive safes where drilling might not be necessary if other methods work instead (which tends to be more common than).

How much effort you’re willing to put into opening your safe often affects how well this method works.

how to crack a gun safe with electronic lock

How long does it take for thieves to crack a gun safe if it’s electronic?

When dealing with modern locks and safes, 1-2 hours is a pretty standard threshold. How long it takes the thieves to crack these safes depends on many factors:

1) Is your safe, new, or old?

With time and frequent use, locks and their components tend to wear out and become less effective. Like any other piece of equipment manufactured with moving parts, gun safes too will eventually malfunction if not properly taken care of (if you can’t afford proper heater/AC for your safe – that’s another issue).

The only exception here is rare cases when criminals carry portable X-ray machines capable of scanning through metal surfaces (such as the ones used by the police and military).

2) How complex is your lock?

Of course, there’s no “easiest” or “hardest” among locks, but your particular lock will fall on one end of the spectrum or another. If you invested in some cheap off-brand safe, it’s only a matter of time before they manage to break into it (if they can’t pull it out first).

3) How much do the thieves know about your gun safe?

 How good are you at hiding things? How fast do you open/close the safe, and how often do you use them? How big is yours safe? How obvious is it that there may be valuables inside? These questions all weigh heavily on how long it takes for burglars to crack safes.

4) Are your weapons properly secured inside the gun safe?

How much do you rely on your gun safe’s security features (coatings, hinges, and bolts)? How well can the burglar hear you inside? How skillful are they? How much time do they have to work with? All these questions affect how long it takes burglars to crack safes.

Does this mean that your gun safe is guaranteed to protect your weapons from thieves? Of course not! The best way to keep your guns out of the hands of criminals is by securing them in an off-site storage facility.

 It is critical to have a secure place where all valuables are properly locked away at night. That being said, modern gun safes provide good security for most burglary scenarios. How well they protect your firearms from theft depends on many individual factors.

Remember that the average gun safe is not designed to be watertight, so if you live near a large body of water, it’s probably best to get your guns dried and cleaned after each use (water damages metal parts).

Tips for choosing a strong, secure gun safe

The following are some tips to choose gun safe:

1. Choose a safe that is big enough to fit all your guns and ammunition.

2. Find out the manufacturer that has any known history of product flaws.

3. Look for safes with reinforced walls and steel-lined doors.

4. Consider buying a fireproof or a waterproof safe to protect your valuables in case of an emergency.

5. Check reviews for customer service, warranty, and returns policy before you buy anything. 

6. Make sure the lock on your new gun safe can be opened easily by you but not by someone else who might have access to it.

7. Consider the size of your gun collection.

8. Look for a model that can be bolted to the floor or wall if desired.

9. If you have children, consider getting one that has an electronic lock and keypad instead of a dial-style combination because kids may not know how to work it properly.

10. There should be enough room in the safe, so weapons don’t touch each other while stored – this will help prevent corrosion from occurring on any metal parts.

11. Some safes also include built-in lights and power outlets inside so you can plug in electronics like laptops or chargers without having to run cords out through doors or windows.

YouTube video


We know that you’re probably not looking for ways to break your gun safe, but the truth is that many people have been through this process. If you ever need to crack a gun safe with an electronic lock, we describe some methods and provide some pointers on how to go about doing so. Want more information? Keep reading!


Similar Posts